Pipefitters install a variety of pipes to move liquids and gasses.
Plumbers, pipefitters, and steamfitters install and repair piping fixtures and systems.
Duties
Plumbers, pipefitters, and steamfitters typically do the following:
Prepare cost estimates for clients
Read blueprints and follow state and local building codes
Determine the materials and equipment needed for a job
Install pipes and fixtures
Inspect and test installed pipe systems and pipelines
Troubleshoot malfunctioning systems
Maintain and repair plumbing sysems
Although plumbers, pipefitters, and steamfitters have distinct responsibilities, they often have similar duties. For example, they all install pipes and fittings that carry water, gas, and other fluids and substances. They determine the necessary materials for a job, connect pipes, and test pressure to ensure that a pipe system is airtight and watertight. Their tools include drills, saws, welding torches, press fitting tools, and drain cleaning tools.
Plumbers, pipefitters, and steamfitters may use different materials and construction techniques, depending on the project. For example, residential water systems use copper, steel, and plastic pipe that one or two plumbers install. Industrial plant water systems, in contrast, are made of large steel pipes that usually take a crew of pipefitters to install.
Journey- and master-level plumbers, pipefitters, and steamfitters frequently direct apprentices and helpers.
Master plumbers on construction jobs may help develop blueprints that show the placement of pipes and fixtures. Their input ensures that a structure’s plumbing meets building codes, stays within budget, and works well with the location of other features, such as electric wires. Many diagrams are created digitally with Building Information Modeling (BIM), which allows workers in several occupations to collaborate in planning a building’s physical systems.
Some of the specific tasks performed by these workers are as follows:
Plumbers install and repair water, gas, and other piping systems in homes, businesses, and factories. They install plumbing fixtures, such as bathtubs and toilets, and appliances, such as dishwashers and water heaters. They clean drains, remove obstructions, and repair or replace broken pipes and fixtures. Plumbers also help maintain septic systems—large, underground holding tanks that collect waste from houses that are not connected to a sewer system.
Pipefitters and steamfitters, sometimes simply called fitters, install and maintain pipes that may carry chemicals, acids, and gases. These pipes are mostly in manufacturing, commercial, and industrial settings. Fitters install and repair pipe systems in power plants, as well as heating and cooling systems in large office buildings. Steamfitters specialize in systems that are designed for the flow of liquids or gases at high pressure. Other fitters may specialize as gasfitters or sprinklerfitters.
Plumbers risk getting burned as they solder pipes.
Plumbers, pipefitters, and steamfitters held about 469,000 jobs in 2021. The largest employers of plumbers, pipefitters, and steamfitters were as follows:
Plumbing, heating, and air-conditioning contractors
66%
Self-employed workers
9
Government
4
Heavy and civil engineering construction
4
Manufacturing
3
Plumbers, pipefitters, and steamfitters work in factories, homes, businesses, and other places where there are pipes and related systems. Plumbers and fitters lift heavy materials, climb ladders, and work in tight spaces. Some plumbers travel to worksites every day. Outdoor work, in all types of weather, may be required.
Injuries and Illnesses
Plumbers, pipefitters, and steamfitters sometimes get injured on the job. Common injuries include cuts from sharp tools, burns from hot pipes and soldering equipment, and falls from ladders.
Work Schedules
Most plumbers, pipefitters, and steamfitters work full time, including nights and weekends. They are often on call to handle emergencies. Self-employed plumbers may be able to set their own schedules.
Most plumbers, pipefitters, and steamfitters learn their jobs through an apprenticeship.
Most plumbers, pipefitters, and steamfitters learn on the job through an apprenticeship. Some also attend vocational-technical school. Most states and some localities require plumbers to be licensed.
Education
A high school diploma or equivalent is typically required to become a plumber, pipefitter, or steamfitter. Vocational-technical schools offer courses in pipe system design, safety, and tool use. They also offer welding courses that are required by some pipefitter and steamfitter apprenticeship training programs.
Training
Most plumbers, pipefitters, and steamfitters learn their trade through a 4- or 5-year apprenticeship. Apprentices typically receive 2,000 hours of paid on-the-job training, as well as some technical instruction, each year. Technical instruction includes safety, local plumbing codes and regulations, and blueprint reading. Apprentices also study mathematics, applied physics, and chemistry. Apprenticeship programs are sponsored by unions, trade associations, and businesses. Most apprentices enter a program directly, but some start out as helpers or complete a pre-apprenticeship training programs in plumbing and other trades.
Plumbers, pipefitters, and steamfitters complete an apprenticeship program and pass the required licensing exam to become journey-level workers. Journey-level plumbers, pipefitters, and steamfitters are qualified to perform tasks independently. Plumbers with several years of plumbing experience who pass another exam earn master status. Some states require master plumber status in order to obtain a plumbing contractor’s license.
Licenses, Certifications, and Registrations
Most states and some localities require plumbers to be licensed. Although licensing requirements vary, states and localities often require workers to have 2 to 5 years of experience and to pass an exam that shows their knowledge of the trade before allowing plumbers to work independently.
Plumbers may also obtain optional certification, such as in plumbing design, to broaden career opportunities. In addition, most employers require plumbers to have a driver’s license.
Some states require pipefitters and steamfitters to be licensed; they may also require a special license to work on gas lines. Licensing typically requires an exam or work experience or both. Contact your state’s licensing board for more information.
Advancement
After completing an apprenticeship and becoming licensed at the journey level, plumbers may advance to become a master plumber, supervisor, or project manager. Some plumbers choose to start their own business as an independent contractor, which may require additional licensing.
Important Qualities
Communication skills. Plumbers must be able to direct workers, bid on jobs, and plan work schedules. Plumbers also talk to customers regularly.
Dexterity. Plumbers must be able to maneuver parts and tools precisely, often in tight spaces.
Mechanical skills. Plumbers, pipefitters, and steamfitters choose from a variety of tools to assemble, maintain, and repair pipe systems.
Physical strength. Plumbers, pipefitters, and steamfitters must be able to lift and move heavy tools and materials.
Troubleshooting skills. Plumbers, pipefitters, and steamfitters find, diagnose, and repair problems. They also help with setting up and testing new plumbing and piping systems.
Note: All Occupations includes all occupations in the U.S. Economy. Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics
The median annual wage for plumbers, pipefitters, and steamfitters was $59,880 in May 2021.
The median wage is the wage at which half the workers in an occupation earned more than that amount and half earned less. The lowest 10 percent earned less than $36,700, and the highest 10 percent earned more than $99,920.
In May 2021, the median annual wages for plumbers, pipefitters, and steamfitters in the top industries in which they worked were as follows:
Manufacturing
$61,640
Plumbing, heating, and air-conditioning contractors
59,730
Heavy and civil engineering construction
59,680
Government
58,730
Apprentices earn less than fully trained plumbers, pipefitters, and steamfitters. However, their pay increases as they learn to do more.
Most plumbers, pipefitters, and steamfitters work full time, including nights and weekends. Plumbers are often on call to handle emergencies. Self-employed plumbers may be able to set their own schedules.
Note: All Occupations includes all occupations in the U.S. Economy. Source: U.S. Bureau of Labor Statistics, Employment Projections program
Employment of plumbers, pipefitters, and steamfitters is projected to grow 2 percent from 2021 to 2031, slower than the average for all occupations.
Despite limited employment growth, about 48,600 openings for plumbers, pipefitters, and steamfitters are projected each year, on average, over the decade.
Most of those openings are expected to result from the need to replace workers who transfer to different occupations or exit the labor force, such as to retire.
Employment
Demand for plumbers will stem from new construction and from the need to maintain and repair plumbing systems in existing residences and other buildings. Employment of sprinklerfitters is expected to increase as states continue to adopt changes to building codes that require the use of fire suppression systems.
Employment projections data for plumbers, pipefitters, and steamfitters, 2021-31
Occupational Title
SOC Code
Employment, 2021
Projected Employment, 2031
Change, 2021-31
Employment by Industry
Percent
Numeric
SOURCE: U.S. Bureau of Labor Statistics, Employment Projections program
For apprenticeship information from the U.S. Department of Labor, visit the Apprenticeship program online or call 877-872-5627. To search for opportunities, visit apprenticeship.gov.
For more information about apprenticeship or other opportunities, contact the offices of the state employment service; the state apprenticeship agency; local plumbing, heating, and cooling contractors or firms that employ fitters; or local union–management apprenticeship committees.
For more information about pre-apprenticeship training, visit